Aluminum honeycomb plate is a kind of composite honeycomb structure, which is made of high-quality 3003h24 alloy aluminum plate or 5052ah14 high manganese alloy aluminum plate and aluminum alloy honeycomb core by hot pressing. Aluminum honeycomb panel provides architects with a wide range of choices from panel material, shape, joint, installation system to color and surface treatment. It can show a wide range of roof performance and has excellent design freedom. It is a new material with convenient construction, ideal comprehensive performance and remarkable insulation effect, and its excellent performance has attracted people's attention.

The panel material used in the aluminum honeycomb panel is better, with high flatness. The back of the aluminum panel does not need stiffeners, and its strength and stiffness can also meet the requirements. Aluminum honeycomb board according to different buildings, regions, curtain wall height, wind pressure size.

According to the design requirements, the thickness of aluminum plate and honeycomb are selected, and different types of large and small pieces are manufactured according to the design requirements, which can meet the following main indexes: wind pressure index, air tightness index, water tightness index, impact resistance index, plane deformation, heat preservation, sound insulation and other indexes. The surface of aluminum plate is usually sprayed with fluorocarbon or powder, and the coating thickness is 40-60 μ。

 The location of sealing holes is also very important for the aluminum honeycomb panel. Otherwise, if it is installed on the wall, the rainwater will flow into the honeycomb core. One is to damage the honeycomb core, and the other is to cause water leakage. Therefore, the aluminum veneer of the outer curtain wall of the aluminum honeycomb panel is wider than the aluminum veneer of the inner curtain wall, which is wider than the thickness of the honeycomb. The four sides are bent inward by 90 degrees. The honeycomb is fully covered by bonding or welding, and no water leakage is allowed.

We remind you that we should also pay attention to the lightning protection of aluminum honeycomb plate, and we should not be careless. We know that the structure of aluminum honeycomb plate is made of two aluminum plates with thickness of 0.8mm-1.2mm and 1.2mm-1.8mm, sandwiched with honeycomb like intermediate core layer made of different materials.